Remote Spectrum Monitoring System Help : Setting Up the Remote Spectrum Monitor Communication : Configuring for Static IP through SCPI Commands
 
Configuring for Static IP through SCPI Commands
To change from DHCP to Static IP, send these commands to port 9001 of the instrument’s dynamic IP address:
1. Set the static values of the Ethernet configuration that are used when DHCP is OFF:
SYSTem:COMMunicate:LAN:CONFig <Static IP>,<Static Gateway>, <Static Subnet>
The <Static IP>, <Static Gateway>, and <Static Subnet> must be enclosed in quotes like the following example:
SYST:COMM:LAN:CONF “124.168.1.1”,“124.168.1.0”,”255.255.255.0”
2. Confirm the static IP settings by querying the static Ethernet configuration:
SYSTem:COMMunicate:LAN:CONFig?
3. Turn off DHCP and set the instrument to static IP mode:
SYSTem:COMMunicate:LAN:DHCP OFF
4. Reboot the instrument.