Introduction

Remote Spectrum Monitoring System Help : Setting Up the Remote Spectrum Monitor Communication : Introduction

Introduction

To communicate with the MS2710xA Remote Spectrum Monitoring system, or to change its IP configuration, a PC must be correctly set up to communicate with the instrument via a direct connection using a static IP. The sections in this guide explain using:

• a Windows PC to directly communicate with the Anritsu spectrum monitor

• SCPI commands for configuring the Ethernet and DNS settings

• the Anritsu Windows network discovery tool to find the instrument IP address

The spectrum monitor is shipped with the following default IP configuration:

• DHCP: OFF (Static IP Address)

• Static IP Address: 10.0.0.2

• Static Subnet: 255.255.255.0

• Static Gateway: 10.0.0.0


	Anritsu Company 1-800-ANRITSU 10450-00052, Rev. F